ITEM INFORMATION
master-piece(Masterpiece)FORCE LEATHER Ver.Backpack of the series.The original leather skin is carefully selected and used North American steros. After chrome tanning, a 3M waterproofing agent is put in a tyco at the time of dyeing, and waterproofing is penetrated into the leather fiber. The waterproofing agent is soaked in the back of the fiber, so it will continue to prevent water and oil from entering not only on the back of the leather, as well as the side of the wound. Because a large amount of special waterproof oil is penetrated there, it is finished in a supple and soft touch. The surface is also finished so that the texture is fine like a kip. It is an extremely soft and ultimate soft smoothing that cannot be done without a good balance, such as tanning, dyeing, and oil mixing. This leather is a waterproof, oilproof, and anti -antifouling leather that has passed the "ScotchGard®" monitoring test. This monitoring test is done by cutting the surface, so it does not diminish as you use it. The attached material is an Invista 1680D Cordura Baristech® nylon with a normal wear, tear strength, and durability of about 5 times the nylon, and improves further strength and waterproofness by applying PVC processing on the back. I am. The tape uses a tape woven with a hollow thread nylon, which is about 20%lighter than the normal tape. The lining is an original jacard with a master-pieCe logo. The zipper in the front pocket uses YKK's Excella, which is carefully polished on the entire element. The main zipper is used in the back of YKK coil Zips and is water -repellent. In addition, we use YKK Aqua Guard Zips that have partially treated water stop. This series is a combination of waterproof leather and high -strength CORDURA Baristec® nylon, imagining an urban outdoor using high -performance and elegant texture.
| Size | W270 H480 D150 M |
|---|---|
| Weight | Approximately 1870g |
| Material | |
| Attention |
Details
Recommend
